Harley Benton DNAfx GiT - Looper Activation and Control

3. Press [VALUE].
ð
The setting is conrmed.
4. Press any footswitch to exit tuner mode.
Submenu Description
‘MUTE’ The audio signal is muted.
‘BYPASS’ The audio signal is bypassed.
‘A=435Hz’ … ‘A=445Hz’ Tuner calibration. The chromatic tuning
range can be set between 435 Hz and 445 Hz.
6.6 Looper
1.
Hold down the [LOOPER] footswitch.
ð
The looper is activated.
2. Turn [VALUE] to select the desired submenu.
3. Press [VALUE].
ð
The setting is conrmed.
Operating
34
DNAfx GiT
Multi Eects Unit