Harley Benton DNAfx GiT - Setting Expression Pedal Volume Control

3. Lower the Expression Pedal to the front and press [VALUE].
ð
The setting is conrmed.
4. Lower the Expression Pedal forwards and apply pressure to the front. Simultaneously
press [VALUE].
ð
The sensitivity of the expression pedal for forward pressure printing is set.
5. Press [SAVE] to save the settings.
1. Press [EXP].
ð
The menu for setting the expression pedal is called up.
2. Press [VALUE] until the display shows ‘EXP VOL’ .
3. Press [VALUE].
ð
The display shows ‘EXP VOL PEDAL: ON’ .
4. Turn [VALUE] to select the desired value for the volume from ‘MIN 000’ to ‘MST 100’ .
5. Press [VALUE].
ð
The setting is conrmed.
Setting the volume of the
expression pedal
Operating
30
DNAfx GiT
Multi Eects Unit