Harman Kardon 430 User Manual

harman/kardon
,ttttt-t-H-t-t--- ~
I
11=-I-
---:-__ :::
~~
1~
~
-~
--
--
~
-
~-
-- - __ _j__j--J_W-J_j
- -
~
--,----------
-
--
~-
-
-~
430
twin powered receiver
owner's manual
f----------
-

Harman Kardon 430 Specifications

General

Power Output	25 watts per channel into 8Ω (stereo)
Frequency Response	20Hz to 20kHz
Total Harmonic Distortion	0.5%
Dimensions	17.5 x 5.5 x 13.5 inches
Tuning Range	FM, MW
Input Sensitivity	2.5mV (MM), 150mV (line)

Summary

Introduction

Connecting the 430

Preparing for Connections

Guidance on selecting the appropriate wire gauge and length for speaker connections.

Ventilation

Ensuring adequate airflow around the receiver to prevent overheating.

Connecting Speakers to the 430

Detailed instructions for connecting speaker systems to the receiver's terminals.

Turntables or Automatic Changers

FM Antenna Connections

AM Antenna Connections

Connecting Tape Equipment

Other Equipment

Operating the 430

Playing Records with the 430

Steps for playing disc recordings using the FUNCTION, VOLUME, and BALANCE controls.

Speaker Phasing Test

Procedure to check and correct speaker phasing for optimal stereo imaging.

Receiving FM Broadcasts

Muting Adjustment

Explanation and adjustment of the FM MUTING control for interstation noise.

Other Controls

Control Descriptions

Explanation of TREBLE, BASS, CONTOUR, TAPE MONITOR, MONO, HI CUT, LO CUT, PHONES, FUNCTION.

Fuses

Limited 2 Year Warranty and Service Policy

430 Specifications

Amplifier Section

Technical specifications for the amplifier's power output, bandwidth, and distortion.

Typical Tuner Performance

Technical specifications and graphs for FM quieting and stereo separation.