Harman Kardon 75+ - Special Applications and Service; Dual System Playback Configuration; Service and Warranty Contact

SPECIAL APPLICATION
The versatility of the 75+ receiver permits the utilization of 2 completely
separate stereo systems reproducing different program material.
Typical Example
System #1 — Connect left and right speakers to the front left and right speaker
terminals.
System #2 — Connect left and right speakers to the back left and right speaker
terminals.
Connect a pair of patch cords from the front tape out receptacles to the
front tape monitor receptacles.
Connect a stereo tape recorder output to the back tape monitor re-
ceptacles.
Mode switch to 4-CH Discrete position.
_ With the tape monitor 1 switch depressed, System #1 will reproduce any
source selected by the function switch. System #2 will reproduce the output
of the tape recorder.
TAPE TAPE
br Our
SYSTEM |
The
volume
control
should
be
used
to
set
the
overall
level.
The
sound
field
Balance
control
should
be
used
to
alter
the
levels
of
the
separate
systems.
The
front
and
back
Tone
controls
will
function
separately
for
each
system.
The
Stereo-4-CH
rear
panel
switch
must
be
in
the
4-CH
position.
SERVICE
If
this
instrument
should
not
perform
properly
during
the
first
two
(2)
years
after
date
of
purchase,
contact
the
factory
for
instructions.
The
factory
has
many
authorized
warranty
service
stations
in
the
United
States.
To
aid
us
in
selecting
a
service
station
convenient
to
you,
it
would
be
helpful
if
you
would
indicate
which
major
city
is
closest
to
your
home.
Please
write
our
Customer
Service
Department,
Harman/Kardon,
Incorporated,
Plainview,
New
York
11803.
Be
sure
to
include
the
model
and
serial
number
of
the
unit.
A
brief
description
of
your
other
components
is
often
of
help
in
answering
your
questions.
DO
NOT
return
this
instrument
to
Harman/Kardon
without
first
receiving
authorization.
STEREO TAPE RECORDER
16
OR ANY OTHER HIGH
LEVEL STEREO SOURCE
SYSTEM 2