Once the settings outlined on the previous pages have
been made, the AVR 140 is ready for operation. While
there are some additional settings to be made, these
a
re best done after you have had an opportunity to lis-
t
en to a variety of sources and different kinds of pro-
gram material. These advanced settings are described
on pages 36–37 of this manual. In addition, any of
the settings made in the initial configuration of the unit
m
ay be changed at any time. As you add new or dif-
ferent sources or speakers, or if you wish to change a
setting to better reflect your listening taste, simply fol-
low the instructions for changing the settings for that
p
arameter as shown in this section.
Having completed the setup and configuration process
for your AVR 140, you are about to experience the
finest in music and home theater listening. Enjoy!
SYSTEM CONFIGURATION
SYSTEM CONFIGURATION 25
AVR 140 OM 3/29/06 3:45 PM Page 25
To Next Page
Loading...
Need help?
General
