REMOTE CONTROL RESET
To reset the remote to its factory defaults, erasing all product codes, learned codes, activities and other
user programming:
1. Press and hold the AVR Settings Button for 3 seconds. The remote will enter Program mode, and its
Main Menu will be displayed.
2. Use the
/ Buttons to scroll to the Remote Reset option, and press the OK Button. The process
may take a few minutes, depending on the amount of user programming requiring erasure.
Please wait until the “Remote Reset Complete” message appears before pressing any keys.
PROCESSOR RESET
If the unit behaves erratically after a power surge, first turn off the Main Power Switch and unplug the AC
power cord for at least 3 minutes. Plug the cord back in and turn the receiver on. If this doesn’t help,
reset the AVR.
To reset the AVR 7550HD, place it in Standby mode (press the front panel Standby/On Switch so that
the Power Indicator turns amber).
Then press the front-panel AVR Settings and Source List Buttons simultaneously until the RESET
message appears
AVR 7550HD harman/kardon
To Next Page
Loading...
