AVR510
To correct this problem, first unplug the unit from the AC wall outlet and
wait at least three minutes. After the pause, reconnect the AC power
cord and check the unit’s operation. If the system still malfunctions, a
system reset may clear the problem. To clear the AVR 510’s entire
system, first put the unit in Standby by pressing the System Power
Control button. Next, press and hold the Tone Mode and the FM Mode
Selector buttons for three seconds. The unit will turn on automatically
and display the RESET message in the Main Information Display
AVR520
To correct this problem, first unplug the unit from the AC wall outlet and
wait at least three minutes. After the pause, reconnect the AC power
cord and check the unit’s operation. If the system still malfunctions, a
system reset may clear the problem. To clear the AVR 520’s entire
system, first put the unit in Standby by pressing the System Power
Control button. Next, press and hold the Tone Mode and the FM Mode
Selector buttons for three seconds. The unit will turn on automatically
and display the RESET message in the Main Information Display
AVR525
To correct this problem, first unplug the unit from the AC wall outlet and
wait at least three minutes. After the pause, reconnect the AC power
cord and check the unit’s operation. If the system still malfunctions, a
system reset may clear the problem. To clear the AVR 525’s entire
system, first put the unit in Standby by pressing the System Power
Control Button. Next, press and hold the Surround Mode and the
Tuner Mode Selector buttons for three seconds. The unit will turn on
automatically and display the RESET message in the Main Information
Display.
AVR55
To correct this problem, first unplug the unit from the AC wall outlet and
wait at least three minutes. After the pause, reconnect the AC power
cord and check the unit’s operation.
AVR630
To correct this problem, first unplug the unit from the AC wall outlet and
wait at least three minutes. After the pause, reconnect the AC power
cord and check the unit’s operation. If the system still malfunctions, a
system reset may clear the problem. To clear the AVR 430’s entire
system memory, first put the unit in Standby by pressing the
Standby/On Switch. Next, press and hold the Surround Mode Group
Selector and the Tuning Mode Selector buttons for three seconds. The
unit will turn on automatically and display the RESET message in the
Upper part of the Display.
AVR7000
To correct this problem, first unplug the unit from the AC wall outlet and
wait at least three minutes. After the pause, reconnect the AC power
cord and check the unit’s operation. If the system still malfunctions, a
system reset may clear the problem. To clear the AVR 7000’s entire
system, first put the unit in Standby by pressing the System Power
Control button. Next, press and hold the Tone Mode and the FM Mode
Selector buttons for three seconds. The unit will turn on automatically
and display the RESET message in the Main Information Display
AVR7200
To clear the AVR 7200’s entire system memory, first put the unit in
Standby by pressing the System Power Control Button. Next, press
and hold the Surround Mode Group Selector and the Tuner Mode
Selector buttons for three seconds. The unit will turn on automatically
and display the RESET message in the Main Information Display.
AVR8000
To correct this problem, first unplug the unit from the AC wall outlet and
wait at least three minutes. After the pause, reconnect the AC power
cord and check the unit’s operation. If the system still malfunctions, a
system reset may clear the problem. To clear the AVR 8000’s entire
system, first put the unit in Standby by pressing the System Power
Control button. Next, press and hold the Tone Mode and the FM Mode
Selector buttons for three seconds. The unit will turn on automatically
and display the RESET message in the Main Information Display
CDR2
First unplug the unit from the AC wall outlet and wait at least three
minutes. After the pause, reconnect the AC power cord and check the
unit’s operation.
CDR20
First unplug the unit from the AC wall outlet and wait at least three
minutes. After the pause, reconnect the AC power cord and check the
unit’s operation.
To Next Page
Loading...
