Harman Kardon CDR2 - Page 10

- 10 -
7. MECHA-1 (CDP) ASSEMBLY REMOVAL
8. MECHA-2 (CDR) ASSEMBLY REMOVAL
1
5
2
43
2
43
1
1. Remove screws to in Fig.7
2. Detach the connector in Fig.7, and the remove the Mecha-1.
1. Remove screws to in Fig.8
2. Remove the Mecha-2 and Cover Deck at the same time.
<Fig 7>
<Fig 8>
➊➍
➎
➊➍