Harman Kardon CDR2 - Front-Panel Controls

- 7 -
DISASSEMBLY PROCEDURES
1. PCB-(POWER SWITCH) REMOVAL
1. Power on and press open buttons and in Fig.1
2. Remove the CD Door and by pulling it toward you gently.
<Fig 1>
<Fig 2>
2. CABINET TOP REMOVAL
2
7
1
5
3
4
6
1. Remove screws to in Fig.2, and then remove the cover
by sliding it to its rear a little.
2. Remove the cabinet top.
➊
➊➐
➋
➌➍