Harman Kardon DPR 2005 Quick Start Guide

Thank you for purchasing a Harman Kardon DPR 2005. This Quick-Start
Guide will help you with a basic system installation. For detailed information
on any step, please refer to the Owner’s Manual pages referenced in this
guide. We strongly recommend that you read the Owner’s Manual for
complete details on how to install, configure and operate the DPR 2005,
as well as for the important safety information it contains.
Figure 1 – Speaker Placement
The colors shown for each speaker correspond to
the matching output terminal connection on the
back of the DPR 2005 (see page 8).
FRONT
LEFT
SPEAKER
(White)
SURROUND
BACK
LEFT
SPEAKER
(Brown)
SURROUND
BACK
RIGHT
SPEAKER
(Tan)
CENTER
SPEAKER
(Green)
SUBWOOFER
(Purple)
SURROUND
LEFT
SPEAKER
(Blue)
FRONT
RIGHT
SPEAKER
(Red)
SURROUND
RIGHT
SPEAKER
(Gray)
Step 1. Place your speakers in the listening room
(see page 19).
SPEAKER PLACEMENT
DPR 2005 QUICK-START GUIDE
Connection Color Guide
Audio Connections Left Right
Front
Center
Surround
Subwoofer
Surround Back
Digital Audio Connections
Coaxial
Optical
Video Connections
Composite
S-Video
Match the colored jacks on the DPR 2005 to the appropri-
ate jacks on your source equipment or speakers. The colors
are standardized, but not all equipment or connectors use
them.

Harman Kardon DPR 2005 Specifications

Audio Section

Continuous Average Power (FTC)	120 Watts per channel, 20Hz–20kHz, @ <0.15% THD, both channels driven into 8 ohms
Power per Individual Channel - Front L&R channels	120 Watts per channel @ <0.15% THD, 20Hz–20kHz into 8 ohms
Power per Individual Channel - Center channel	120 Watts @ <0.15% THD, 20Hz–20kHz into 8 ohms
Power per Individual Channel - Surround channels	120 Watts per channel @ <0.15% THD, 20Hz–20kHz into 8 ohms
Input Sensitivity/Impedance - Linear (High-Level)	200mV/47k ohms
Signal-to-Noise Ratio (IHF-A)	97dB
Surround System Adjacent Channel Separation - Pro Logic I/II/IIx	40dB
Surround System Adjacent Channel Separation - Dolby Digital	55dB
Surround System Adjacent Channel Separation - DTS	55dB

FM Tuner Section

Frequency Range	87.5–108.0MHz
Usable Sensitivity IHF	1.3µV/13.2dBf
Signal-to-Noise Ratio Mono/Stereo	70/68dB
Distortion Mono/Stereo	0.2/0.3%
Stereo Separation	40dB @ 1kHz
Selectivity	±400kHz, 70dB
Image Rejection	80dB
IF Rejection	90dB

AM Tuner Section

Frequency Range	520–1720kHz
Signal-to-Noise Ratio	45dB
Usable Sensitivity Loop	500µV
Distortion	1kHz, 50% Mod 0.8%
Selectivity	±10kHz, 30dB

Video Section

Television Format	NTSC
Input Level/Impedance	1Vp-p/75 ohms
Output Level/Impedance	1Vp-p/75 ohms
Video Frequency Response (Composite and S-Video)	10Hz–8MHz (–3dB)
Video Frequency Response (Component Video)	10Hz–50MHz (–3dB)

General

Power Requirement	AC 120V/60Hz
Power Consumption Standby	8.9W
Power Consumption Idle	58W
Power Consumption Max	1073W (7 channels driven)
Width - Product	17.3 inches (440mm)
Width - Shipping	22.6 inches (573mm)
Height - Product	4.5 inches (114mm)
Height - Shipping	8.9 inches (225mm)
Depth - Product	18.8 inches (476mm)
Depth - Shipping	21.9 inches (555mm)
Weight - Product	23.1 lb (10.5kg)
Weight - Shipping	27.5 lb (12.5kg)