Harman Kardon DPR 2005 Service Manual

DPR 1005 - 2005 Digital Path Receiver Rev 2
SERVICE MANUAL
harman/kardon
®
Power for the Digital Revolution®

Harman Kardon DPR 2005 Specifications

Audio Section

Continuous Average Power (FTC)	120 Watts per channel, 20Hz–20kHz, @ <0.15% THD, both channels driven into 8 ohms
Power per Individual Channel - Front L&R channels	120 Watts per channel @ <0.15% THD, 20Hz–20kHz into 8 ohms
Power per Individual Channel - Center channel	120 Watts @ <0.15% THD, 20Hz–20kHz into 8 ohms
Power per Individual Channel - Surround channels	120 Watts per channel @ <0.15% THD, 20Hz–20kHz into 8 ohms
Input Sensitivity/Impedance - Linear (High-Level)	200mV/47k ohms
Signal-to-Noise Ratio (IHF-A)	97dB
Surround System Adjacent Channel Separation - Pro Logic I/II/IIx	40dB
Surround System Adjacent Channel Separation - Dolby Digital	55dB
Surround System Adjacent Channel Separation - DTS	55dB

FM Tuner Section

Frequency Range	87.5–108.0MHz
Usable Sensitivity IHF	1.3µV/13.2dBf
Signal-to-Noise Ratio Mono/Stereo	70/68dB
Distortion Mono/Stereo	0.2/0.3%
Stereo Separation	40dB @ 1kHz
Selectivity	±400kHz, 70dB
Image Rejection	80dB
IF Rejection	90dB

AM Tuner Section

Frequency Range	520–1720kHz
Signal-to-Noise Ratio	45dB
Usable Sensitivity Loop	500µV
Distortion	1kHz, 50% Mod 0.8%
Selectivity	±10kHz, 30dB

Video Section

Television Format	NTSC
Input Level/Impedance	1Vp-p/75 ohms
Output Level/Impedance	1Vp-p/75 ohms
Video Frequency Response (Composite and S-Video)	10Hz–8MHz (–3dB)
Video Frequency Response (Component Video)	10Hz–50MHz (–3dB)

General

Power Requirement	AC 120V/60Hz
Power Consumption Standby	8.9W
Power Consumption Idle	58W
Power Consumption Max	1073W (7 channels driven)
Width - Product	17.3 inches (440mm)
Width - Shipping	22.6 inches (573mm)
Height - Product	4.5 inches (114mm)
Height - Shipping	8.9 inches (225mm)
Depth - Product	18.8 inches (476mm)
Depth - Shipping	21.9 inches (555mm)
Weight - Product	23.1 lb (10.5kg)
Weight - Shipping	27.5 lb (12.5kg)