Do you have a question about the Harman Kardon HK3250 and is the answer not in the manual?
continuous average power (FTC) 8 Ohms | 40 Watts |
---|---|
continuous average power (FTC) 4 Ohms | 65 Watts |
high-instantaneous current capability (HCC) | ±20 Amps |
sensitivity, external antenna | 25 µV |
---|---|
alternate channel selectivity | 38 dB |
image rejection | 35 dB |
50dB quieting sensitivity, stereo | 40.3 dBf |
---|---|
signal-to-noise ratio @ 65dBf, mono/stereo | 70 dB/65 dB |
capture ratio | 2.0 dB |
signal-to-noise ratio (ref. 1 Volt, A-Wtd) CD | 92 dB |
---|---|
signal-to-noise ratio (ref. 1 Volt, A-Wtd) Video | 83 dB |
input sensitivity/impedance Video, CD, Tape | 150 mV/22 kΩ |
dimensions (W × H × D) in inches | 17 5/16 × 4 7/8 × 14 15/16 |
---|---|
dimensions (W × H × D) in mm | 440 × 125 × 380 |
weight | 18 lbs, 8.2 kg |
Controls for powering the unit, selecting input sources, and adjusting volume.
Buttons for manual tuning, preset scanning, and storing radio stations.
Controls for adjusting bass, treble, balance, and speaker selection.
Headphone jack, tape monitor function, and display window.
Steps for turning on the unit, selecting program sources, and adjusting volume.
Methods for tuning radio stations including auto, manual, and preset tuning.
Procedure for storing up to 30 stations into the receiver's memory.
How to recall specific preset stations and scan through them sequentially.
Instructions for selecting sources and recording audio onto a cassette deck.
Details on the remote's transmitter window and the standby button function.
Buttons for station tuning, preset scanning, and selecting input sources.
Functions for adjusting volume, display brightness, and setting sleep timer.
Mute button function and information regarding the remote's battery compartment.
Checks for unit power, sound output, and connection problems.
Troubleshooting for interference, distortion, or inability to preset stations.
Technical details on power output, frequency response, and input sensitivity.
Specifications for FM and AM tuner sensitivity, selectivity, and stereo separation.
Measurements for width, height, depth, and the overall weight of the unit.