Name: Harman Kardon ONYX STUDIO 4
Brand: Harman Kardon
Rating: 5 (1 reviews)

To Next Page

To Previous Page

3-3

SAFETY PRECAUTIONS

The following check should be performed for the

continued protection of the customer and

service technician.

LEAKAGE CURRENT CHECK

Measure leakage current to a known earth ground (water pipe, conduit,

etc.) by connecting a leakage current tester between the earth ground

and all exposed metal parts of the appliance (input/output terminals,

screwheads, metal overlays, control shaft, etc.). Plug the AC line cord

of the appliance directly into a 120V AC 60Hz outlet and turn the AC

power switch on. Any current measured must not exceed o.5mA.

Test all

exposed metal

surfaces

Also test with

plug reversed

(Using AC adapter

plug as required)

Leakage

current

tester

Reading should

not be above

0.5mA

Earth

ground

AC Leakage Test

ANY MEASUREMENTS NOT WITHIN THE LIMITS

OUTLINED ABOVE ARE INDICATIVE OF A

POTENTIAL SHOCK HAZARD AND MUST BE

CORRECTED BEFORE RETURNING THE APPLIANCE

TO THE CUSTOMER.

Device

under

test

Other manuals for Harman Kardon ONYX STUDIO 4

Questions and Answers:

Need help?

Do you have a question about the Harman Kardon ONYX STUDIO 4 and is the answer not in the manual?

General