Specifications
Specifications
SB 10 system
Frequency response: 45Hz – 20kHz (–6dB)
SB 10 soundbar speaker
Low-frequency transducer
Left:
Right:
Center:
3" (76mm) paper cone, video-shielded
3" (76mm) paper cone, video-shielded
Two 3" (76mm) paper cones, video-shielded
High-frequency transducer
Left:
Right:
Center:
3/4" (19mm) silk dome, video-shielded
3/4" (19mm) silk dome, video-shielded
3/4" (19mm) silk dome, video-shielded
Recommended power handling
Left –Right:
Center:
60 watts (each)
100 watts
Nominal impedance: 8 ohms (each channel)
Sensitivity (2.83V/1m): 84dB (each channel)
Crossover frequency: 2.2kHz, 24dB/octave
Connector type: Push-spring terminal
Enclosure type: Sealed
Finish: Gloss black
Dimensions (H x W x D): 4-5/16" x 36-1/4" x 3-1/2"
(110mm x 920mm x 89mm)
Weight: 8.1 lb (3.67kg)
Powered Subwoofer
Low-frequency transducer: 8" (200mm) down-firing cone, video-shielded
Amplifier power: 200 watts
Frequency response: 45Hz – 200Hz (–6dB)
Controls: Volume, phase, bass boost
Connections: LFE input, left and right RCA line-level inputs
Enclosure type: Sealed
Finish: Gloss black
Power requirement: AC 100 ~ 120V, 50/60Hz, 200W or
AC 220 ~ 240V, 50/60Hz, 200W
Power consumption: <1W (standby); 200W (maximum)
Dimensions (H x W x D): 13-29/32" x 10-1/2" x 10-1/2"
(353mm x 267mm x 267mm)
Weight: 19.8 lb (9kg)
0252CSK - HK SB10 120V+230V OM EN.indd 12 05/10/10 14:07:45
To Next Page
Loading...
