Harman AKG WMS420 Quick Start Guide

3.1 Mounting
the Microphone
Arm on the Left
or Right
As delivered, the microphone arm
is fitted on the
right
side
of the behind-the-neck headband. To
mount the microphone arm on
the left side of
the
headband:
3
i
I
Jr
3.1 Putting the
Microphone on
Figs. 3 to 5l Putting
on and
tightening
the headband.
Fig. 6: Bending the
headband and
temple
pieces
to
fit.
Refer to fig. 6.
17
Fig. 2: Removing
the microphone
arm.
Pull the microphone arm holder
(2)
w¡th the
mi-
crophone
arm
(3)
from the
temple
piece (1)
in
the
direction of
the
arrow.
Remove
the cover
(4)
from
the other temple
piece.
Remove the
cable from the
cable holder
(5).
lnsert the microphone arm holder
(2)
and
the
cover
(4)
all the way into the respective wire
loop
below
the
opposite temple
piece (1).
ffhe
cover
(4)
stabilizes the temple
piece
and
prevents your
hair from
getting
caught in the
wire loop.)
Press the cable back into the cable holder
(5).
Put the behind-the-
neck headband on
as shown
in figs.
3
through
5.
2.
Should the microphone fit loosely,
you
may
bend the behindthe-neck
headband
and the
temple
pieces
inward:
.
Hold
the headband
or temple
piece
firmly
at
the
points
marked in fig.
6 and bend
inward
with extreme care.
r
Check
whether the
microphone fits
better. lf it
does not, bend the
wire some
more, again
with
extfeme care.
AKG
C 555 L
Refer to
fig.
2.
1.
2.
ó.
4.
Ã
16
AKG C 555 L
4
4,53b
ta
-
3a1,2
5
I
ìì
TF

Harman AKG WMS420 Specifications

General

Brand	Harman
Model	AKG WMS420
Category	Microphone system
Language	English