Harman AMX MU Series User Manual

pg. 26
INPUT PWR Connector
The MU-1300, MU-2300 and MU-3300 controllers feature a 2-pin 3.5 mm Phoenix connector with screw retention for
providing DC power to the controller. The suggested power supply for the MU-series controllers is a 13.5 VDC 6.6 A
output, suitable for 50° C.
Preparing Captive Wires
You will need a wire stripper and flat-blade screwdriver to prepare and connect the captive wires.
NOTE: Never pre-tin wires for compression-type connections.
1. Strip 0.25 inch (6.35mm) of insulation off all wires.
2. Insert each wire into the appropriate opening on the connector (according to the wiring diagrams and connector
types described in this section).
3. Tighten the screws to secure the wire in the connector. Do not tighten the screws excessively, as doing so may
strip the threads and damage the connector.
ID Pushbutton
All MU-series controllers feature an ID pushbutton which you can use to reset the default settings on the controller or
restore the controller to its factory firmware image. The Status LED will indicate the action performed by changing
color.
The ID Pushbutton functionality is as follows:
ID Button Hold Duration
Status LED color
Function Performed on Release
Not held
Green, blinking if scripts are running
Running normally
0 – 10 seconds
White, fast blinking
Running normally, ID broadcast sent
10 – 20 seconds
Amber, fast blinking
Configuration Reset (see below)
20 + seconds
Red, fast blinking
Factory Firmware Reset (see below)
A configuration reset performs the following operations:
• All user scripts (Python, Groovy, JavaScript and Node-RED) and libraries are deleted
• All manually installed extensions are uninstalled
• All manually configured repositories are removed
• All device instance files are removed
• All Plug-in configuration items are reset to their defaults
• All SMTP servers are removed
• ICSP authentication/encryption returns to "off"
• All bound NDP devices are unbound (TBD)
• All IRL files are removed
• All installed HiQnet AudioArchitect files are removed
• HiQnet node id returns to default
• All Duet module .jar files are removed
• Network configuration is returned to defaults
• LAN returns to DHCP client mode, hostname returns default value
• ICSLan returns to DHCP Server mode on octets 198.18.0.x
• 802.1x is disabled
• Network time is disabled
• NTP servers are cleared
• Time will coast using the real-time clock

Harman AMX MU Series Specifications

General

Brand	Harman
Model	AMX MU Series
Category	Controller
Language	English