pg. 27
• Time zone returns to default
• User accounts are deleted
• The default credentials of "admin" with default "password" are restored
• "support" user is disabled
• Any configured syslog server is disabled and cleared
• Any configured flash media logging is disabled
• Any manually installed certificates are removed
• Factory certificates for HControl, HTTPS and Secure ICSP are restored
• Device control ports return to default state
• IRL files are cleared
• Serial port comm parameters return to their default (9600, 8 data bits, 1 stop bit, No parity, 422/485 disabled)
• All I/O's return to digital input mode with default threshold values
A Factory Firmware reset includes a Configuration Reset and also loads the original firmware present at the time of
manufacture.
LED Patterns
The MU-series features one visible-light tri-color status LED.
ID Button Held (Release for Locate Message broadcast)
ID Button Held (Release for Config reset)
ID Button Held (Release for Factory reset)
Error connecting to built-in ports
To Next Page
Loading...
Need help?
General
