25
System
In the System Column, users can set up following settings:
Firmware Version: In the Firmware Version column, the firmware version can be checked.
RS-232 Settings: In the RS-232 Settings column, users can choose to turn “ON” or “OFF” the RS-232 stream and set the
following configuration:
Baud Rate: Set the baud rate. The available range is from 2400 to 115200 baud.
Parity Bits: Set the connection parity bit. The available options are: none, odd, and even.
Data Bits: Set the number of data bits. The available range is from 7 to 8.
Stop Bits:
Set the number of stop bits. The available range is from 1 to 2.
Panel Lock: In the Panel Lock column, the front panel lock can be set as “OFF”, “Menu” or “ALL”.
System: In the System column, the unit can be set to “Reboot” and “Factory Default”.
To Next Page
Loading...
