57
Windowing Commands
1.
get video mode Get video mode for
video output
Command sent:
>get video mode
Response:
get quad video mode for video output
2.
set video
mode:<mode>
Set video mode for
video output
<mode>=
{
matrix,
pip,
3stack,
quad,
}
Command sent:
>set video mode:pip
Response:
set pip video mode for video output
3.
get win
select:<window
channel>
Get the video input
to be used for the
specified window
NOTE: The
command is only
supported for
PR-WP-412 under
Windowing mode
<window channel>=
1~4
Command sent:
>get win select:1
Response:
get video input 1 to be used for window 1
4.
set win
select:<window
channel>,<input
channel>
Set the video input
to be used for the
specified window
NOTE: The
command is only
supported for
PR-WP-412 under
Windowing mode
<window channel>=
1~4
<input channel>=
1~4
Command sent:
>set win select:1,2
Response:
set video input 2 to be used for window 1
>set switch video from input 2 for window 1
5.
get win pos
x:<window channel>
Get the position
x(horizontal) for the
specified window
NOTE: The
command is only
supported for
PR-WP-412 under
Windowing mode
<window channel>=
1~4
Command sent:
>get win pos x:1
Response:
get position x of window 1 is 50
6.
set win pos Set the position <window channel>=
Command sent:
To Next Page
Loading...
