Harman AMX PR-WP-412 - Input Configuration Commands

38
Configuration Commands-Input
No.
Command
Description
Variables
Example
1. get vidin
portname:<input
channel>
Get the name of the
specified input
<input channel>=
1~4
Command sent:
>get vidin portname:1
Response:
get input port 1 named as meeting room 1
2. set vidin
portname:<input
channel>,<name>
Set the name of the
specified input
<input channel>=
1~4
<name= name string
Command sent:
>set vidin portname:1,123
Response:
set input port 1 named as meeting room 2
3. get vidin
hdcp:<input
channel>
Get the HDCP mode
for the specified
input
<input channel>=
1~4
Command sent:
>get vidin hdcp:1
Response:
get HDCP compliance on for input port 1
4. set vidin
hdcp:<input
channel>,<hdcp_co
mpliance>
Set the HDCP mode
for the specified
input
<input channel>=
1~4
<hdcp_compliance>
= on/off
Command sent:
>set vidin hdcp:1,on
Response:
set HDCP compliance on for input port 1
5. get vidin res:<input
channel>
Get input video
resolution for the
specified input
<input channel>=
1~4
Command sent:
>get vidin res:1
Possible response message includes:
▪ get 1920x1080p,60 video input 1
▪ get no video input 1
6. get vidin
edidmode:<input
channel>
Get edid mode for
the specified input
<input channel>=
1~4
Command sent:
>get vidin edidmode:1
Response:
get input 1 edid mode set to all hd resolutions
7. set vidin
edidmode:<input
channel>,<edid_mo
de>
Set edid mode for
the specified input
<input channel>=
1~4
<edid_mode=
{
Auto
All HD RESOLUTIONS
HD WIDE SCREEN
HD FULL SCREEN
4K
4K60
Custom
MIRROR OUTPUT1
MIRROR OUTPUT2
MIRROR OUTPUT3
MIRROR OUTPUT4
Command sent:
>set vidin edidmode:1,MIRROR OUTPUT1
Response:
set input 1 edid mode to MIRROR OUTPUT1