Harman AMX PR-WP-412 - Switching Commands

53
Switching Commands
No.
Command
Description
Variables
Example
1. load preset:<preset
mode>
Load the specified
preset mode for
switcher setting
<preset mode>= 1~8
Command sent:
>load preset:1
Response:
loaded preset 1
2. save preset:<preset
mode>
Save current
switcher setting as
the specified preset
mode
<preset mode>= 1~8
Command sent:
>save preset:2
Response:
saved current switcher as preset mode 2
3. get preset
name:<preset
mode>
Get preset name for
the specified preset
mode
<preset mode>= 1~8
Command sent:
>get preset name:2
Response:
get Preset 2 as name for preset mode 2
4. set preset
name:<preset
mode>,<name>
Set preset name for
the specified preset
mode
<preset mode>= 1~8
<name>= name
string
Command sent:
>set preset name:2,1toALL
Response:
set 1toAll as name for preset mode 2
5. get switch VI<input
channel>
Get which video
outputs is switched
to specified input
or
get which window is
switched to
specified video input
(just for PR-WP-412
under Windowing
mode)
<input channel>=
1~4
Command sent:
>get switch VI1
Possible response message includes:
▪get switch video from input 1 for all output
▪get switch video from input 1 for no output
▪get switch video from input 1 for output 1,2
▪get switch video from input 1 for window 1
▪invalid
6. get switch
VO<channel>
Get which video
input is switched to
specified output
or
get which video
input is switched to
specified window
(just for PR-WP-412
under Windowing
mode)
<channel>=
{
1~4 for PR-WP-412
Window Channel
under Windowing
mode,
1~2 for PR-WP-412
Output Channel
under Matrix Mode
}
Command sent:
>get switch VO2
Possible response message includes:
▪get switch video from input 1 for output 2
▪get switch no video from no input for output 2
▪get switch video from input 1 for window 2
▪get switch video from no video input for window 2
▪invalid
7. set switch VI<input
channel>O<channel>
Set switch video for
input port to the
output port.
1~4 for PR-WP-412
}
Possible command sent:
▪set switch VI1OALL
▪set switch VI2O1