54
Or
set switch video
input to the
specified window
(just for PR-WP-412
under Windowing
mode)
NOTE: The
command is linked
to “set win
select“ for
PR-WP-412 in
Windowing Mode
<output channel>=
{
0 for Selection of No
channel,
1~4 for PR-WP-412
Window Channel
under Windowing
mode,
1~2 for PR-WP-412
Output Channel
under Matrix Mode,
all for Selection of
ALL channel
}
▪set switch VI4O2
▪set switch VI2O1,2,3
▪set switch VI2O0
Possible response message includes:
▪set switch video from input 1 for all output
▪set switch video from no input for output 1
▪set switch video from no input for window 1
▪set switch video from no input for output 1,2
▪set switch video from input 2 for window 1,2,3
▪set switch video from input 2 for no output
▪invalid switch
8.
get switch CI<input
channel>
Get audio/video in
specified input are
switched to which
outputs
NOTE: "get switch
CI" command
response as "get
switch AI" and "get
switch VI" for
PR-WP-412 under
Matrix Mode, as its
audio and video can
be routed
independently
NOTE: "get switch
CI" command isn't
supported for
PR-WP-412 in
Windowing Mode
<input channel>=
1~4
Command sent:
get switch CI1
Possible response message includes:
For PR-WP-412, Matrix Mode
▪get switch video from input 1 for all output
▪get switch audio from input 1 for all output
▪get switch video from input 1 for output 1
▪get switch audio from input 1 for output 2
▪get switch audio from input 1 for no output
For PR-WP-412, Windowing Mode
▪no support in windowing video mode
9.
get switch
CO<output channel>
Get audio/video in
specified output are
switched from which
inputs
<output channel>=
1~2 for PR-WP-412
Output Channel
under Matrix Mode
Command sent:
>get switch CO2
Possible response message includes:
For PR-WP-412, Matrix Mode
▪get switch video from input 1 for output 2
▪get switch audio from input 1 for output 2
To Next Page
Loading...
