Harman AMX PR-WP-412 - System Commands

29
Appendix: API Command List Instructions
System Commands
No.
Command
Description
Variables
Example
1. ? Or help Display the
commands listed
in the table
Command sent:
>?
Response:
----------------- Help -------------------
---System Commands---
? Or help This list
ping ping to specified IP address
fwversion Request the firmware version of the device
….
2. ?<command> Show details
about the
specified
command
function
Command sent:
>?set vidin hdcp
Response:
--------------------------------
Description: Set the HDCP mode for the specified input
Example:
Command send: set vidin hdcp:1,off
response: set HDCP compliance off for input port 1
--------------------------------
3. ping Ping to specified
IP address
Command sent:
>ping 192.168.1.2
Response:
ping 192.168.1.2 is alive.
4. fwversion Request the
firmware version
of the device
NOTE:
Command
response shall
list all
upgradable
components
firmware
version
Command sent:
>fwversion
Response:
Package: 1.39
ARM: 1.39
MCU: 1.39
5. fwupdatestatus Report device's
firmware update
status with node
Command sent:
>fwupdatestatus
Response: