Harman AMX PR-WP-412 - Page 37

37
you will need to
reset it in WebGUI
NOTE: This
command is
supported by SSH
only, not by telnet
5. set ssh username Set the Username
for a secure SSH
session
NOTE: This
command is
supported by SSH
only, not by telnet
Command sent:
>set ssh username
Response:
Enter SSH new username ->123
Would you like to set this username (y/n) ->y
(please set SSH password)
Changed && Saved
6. set ssh password Set the Username
for a secure SSH
session
NOTE: This
command is
supported by SSH
only, not by telnet
Command sent:
>set ssh password
Response:
Enter SSH new password ->123
Would you like to set this password (y/n) ->y
Changed && Saved