Harman AMX PR-WP-412 - Page 56

56
12. get switch
AO<output channel>
Get which audio
input is switched to
specified audio
output
<output channel>=
1~2
Command sent:
>get switch AO2
Possible response message includes:
▪get switch audio from input 1 for output 2
▪get switch audio from no input for output 2
▪invalid
13. set switch AI<input
channel>O<output
channel>
Switch the audio
channel for the
specified output or
window ,both HDMI
Embedded audio
and analog audio
output
NOTE: The
command is linked
to “set audout
priority” command
<input channel>=
{
0 for no channel,
1~4 for input
channel
}
<output channel>=
{
0 for Selection of No
output channel,
1~2 for output
channel (both
Windowing and
Matrix Mode),
all for selection of all
output
}
Possible command sent:
▪set switch AI1OALL
▪set switch AI2O1,2
▪set switch AI2O0
▪set switch AI2O1
Possible response message includes:
▪set switch audio from input 1 for all output
▪set switch audio from input 2 for output 1,2
▪set switch audio from input 2 for no output
▪set switch audio from input 2 for window 1
▪invalid switch