Harman AMX PR-WP-412 - Page 43

43
saturation:<input
channel>,<saturati
on>
the specified input 1~4
<saturation= 0~100
(50 is bypass)
>set vidin satuation:1,100
Response:
set saturation to 100 for input 1
18. get vidin
hue:<input
channel>
Get hue setting for
the specified input
<input channel>=
1~4
Command sent:
>get vidin hue:1
Response:
get hue set to 50 for input 1
19. set vidin hue:<input
channel>,<hue>
Set hue for the
specified input
<input channel>=
1~4
<hue= 0~100 (50 is
bypass)
Command sent:
>set vidin hue:1,100
Response:
set hue to 100 for input 1
20. get vidin
sharpnessh:<input
channel>
Get sharpness h
setting for the
specified input
<input channel>=
1~4
Command sent:
>get vidin sharpnessh:1
Response:
get sharpnessh set to 10 for input 1
21. set vidin
sharpnessh:<input
channel>,<sharpnes
sh>
Set sharpness h for
the specified input
<input channel>=
1~4
<sharpnessh= 0~20
(10 is bypass)
Command sent:
>set vidin sharpnessh:1,20
Response:
set sharpnessh to 20 for input 1
22. get vidin
sharpnessv:<input
channel>
Get sharpness v
setting for the
specified input
<input channel>=
1~4
Command sent:
>get vidin sharpnessv:1
Response:
get sharpnessv set to 10 for input 1
23. set vidin
sharpnessv:<input
channel>,<sharpnes
sv>
Set sharpness v for
the specified input
<input channel>=
1~4
<sharpnessv= 0~20
(10 is bypass)
Command sent:
>set vidin sharpnessv:1,20
Response:
set sharpnessv to 20 for input 1
24. get vidin aspect
ratio:<input
channel>
Get aspect ratio
setting for the
specified input
<input channel>=
1~4
Command sent:
>get vidin aspect ratio:1
Response:
get aspect ratio set to best fit for input 1
25. set vidin aspect
ratio:<input
channel>,<aspect
ratio>
Set aspect ratio for
the specified input
<input channel>=
1~4
<aspect ratio>=
{
full,
best fit,
16:9,
16:10,
4:3,
user
Command sent:
>set vidin aspect ratio:1,user
Response:
set aspect ratio to user for input 1
>set position y of window 1 to 0
>set the height size for window 1 to 480
>set aspect ratio to user for input 1