Harman AMX PR-WP-412 - Page 45

45
29. set vidin border
color:<input
channel>,<color>
Set the border color
setting for the
specified input
NOTE: The
command is only
supported for
PR-WP-412 under
Matrix Mode
<input channel>=
1~4
<color>=
{
bk for Black,
r for Red,
g for Green,
b for Blue,
y for Yellow,
m for Magenta,
c for Cyan,
w for White,
dr for Dark Red,
dg for Dark Green,
db for Dark Blue,
dy for Dark Yellow,
dm for Dark
Magenta,
dc for Dark Cyan,
gr for Gray
}
Command sent:
>set vidin border color:1,g
Response:
set the border color green for input 1
30. get vidin
mirror:<input
channel>
Get the video mirror
state from specified
input
NOTE: The
command is only
supported for
PR-WP-412 under
Matrix Mode
<input channel>=
1~4
Command sent:
>get vidin mirror:1
Response:
get the video mirror off for input 1
31. set vidin
mirror:<input
channel>,<state>
Set the video mirror
on or off state for
specified input
NOTE: The
command is only
supported for
PR-WP-412 under
Matrix Mode
<input channel>=
1~4
<state>= on/off
Command sent:
>set vidin mirror:1,on
Response:
set the video mirror on for input 1