Harman AMX PR-WP-412 - Page 59

59
command is only
supported for
PR-WP-412 under
Windowing mode
11. get win size
height:<window
channel>
Get the height size
for the specified
window
NOTE: The
command is only
supported for
PR-WP-412 under
Windowing mode
<window channel>=
1~4
Command sent:
>get win size height:2
Response:
get the height size for window 2 is 300
12. set win size
height:<window
channel>,<value>
Set the height size
for the specified
window
NOTE: The
command is only
supported for
PR-WP-412 under
Windowing mode
<window channel>=
1~4
<value>= 0~Height
of current output
resolution
Command sent:
>set win size height:2,400
Response:
set the height size for window 2 to 400
13. get win
priority:<window
channel>
Get the display layer
priority for the
specified window
NOTE: The
command is only
supported for
PR-WP-412 under
Windowing mode
<window channel>=
1~4
Command sent:
>get win priority:1,4
Response:
get display layer priority 4 for window 1
14. set win
priority:<window
channel>,<priority>
Set the display layer
priority for the
specified window
NOTE: The
command is only
supported for
PR-WP-412 under
Windowing mode
<window channel>=
1~4
<priority>= 1~4
Command sent:
>set win priority:1,3
Response:
set display layer priority 3 for window 1