- 11 -
Mic mount with 1/4" male screw
01 02 03 04
1. Rotate counterclockwise to screw out the microphone from the stand.
2. Use a 3/32" (2.5 mm) slotted screwdriver to keep the threaded nut on the top of
the stand in place. Then rotate counterclockwise to screw it out from the stand.
3. Screw the nut into the hole at the bottom of the microphone securely.
4. Attach the microphone onto a mic mount (a tripod or boom arm etc.) with 1/4"
(6.35 mm) male screw securely.
To Next Page
Loading...
