EasyManua.ls Logo

Harman JBL QUANTUM Stream - Product Specifications

Harman JBL QUANTUM Stream
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 13 -
Product Specifications
MICROPHONE
Power required/consumption: 5 V 500 mA
Sample rates: 44.1 kHz / 48 kHz / 96 kHz
Bit rate: 16 / 24 bit
Capsules: 14 mm Electret Condenser Microphone
Polar patterns: Cardioid & Omni-directional
Frequency response: 20 Hz - 20 kHz
Sensitivity: -37 ± 3 dB (1 kHz@1 Pa, 0 dB = 1 v/Pa)
Maximum SPL: 110 dB
HEADPHONE AMPLIFIER
Impedance: >16 ohm
Power output (RMS): 45 mWrms per channel (Load = 32 ohms)
THD: <0.5% (Load = 32 ohms)
Frequency response: 20 Hz - 20 kHz
Signal to noise: 90 dB (A weighted)
DIMENSIONS - MIC WITH STAND
Dimensions (L x W x H): 8 cm x 8 cm x 17.43 cm / 3.15" x 3.15" x 6.86"
Weight: 248 g / 0.547 lbs
NOTE:
Technical specifications are subject to change without prior notice.

Other manuals for Harman JBL QUANTUM Stream

Related product manuals