4
MAC Aura XIP Safety and Installation Manual
Safety Information
The following symbols are used to identify important safety information on the product and in this document:
Warning! The MAC Aura XIP from Martin® contains components that are accessible and live at high
voltage while the fixture is connected to power. These components remain under tension for up to
five minutes after power is disconnected.
Only qualified technicians are permitted to open the fixture. Users may carry out external cleaning
and clean the air filter as described in this manual, following the warnings and instructions
provided, but any service operation not described in this manual or in the fixture’s User Guide must
be referred to an authorized Martin service technician.
Warning! Risk Group 2 product (see “Protection from eye injury” on page 6). This product produces
intense light output that may be hazardous if suitable precautions are not taken. Do not view the
light output with optical instruments or any device that may concentrate the beam.
This product presents risks of severe injury or death due to fire and burn hazards, electric shock and falls if
the safety precautions in this manual are not followed.
Read this manual before installing, powering or servicing the fixture. Follow the safety precautions and
observe all warnings in this manual, in the MAC Aura XIP User Guide and printed on the fixture.
The latest versions of this Safety and Installation Manual and the MAC Aura XIP User Guide are available
for download from the MAC Aura XIP areas of the Martin website at www.martin.com. Before you install,
operate or service the fixture, check the Martin website and make sure that you have the latest user
documentation for the fixture. Document revisions are indicated at the bottom of page 2.
This product is for professional use only. It is not for household use. Respect all locally applicable laws,
codes and regulations when installing, powering, operating or servicing the fixture.
Install, operate and service Martin products and accessories only as directed in their user documentation,
or you may create a safety hazard or cause damage that is not covered by product warranties.
The latest software, manuals and other documentation for all Martin products are available for download at
www.martin.com
Technical Support
If you have questions about how to install or operate the fixture safely, please contact Harman Professional
Technical support:
• For technical support in North America, please contact: HProTechSupportUSA@harman.com
Phone: (844) 776-4899
• For technical support outside North America, please contact your national distributor.
WARNING!
Read the safety precautions in this section before
installing, powering, operating or servicing this
product.
DANGER!
Safety hazard.
Risk of severe
injury or death.
DANGER!
Hazardous
voltage. Risk of
lethal or severe
electric shock.
WARNING!
Fire hazard.
WARNING!
Burn hazard. Hot
surface. Do not
touch.
WARNING!
Intense light
emission.
WARNING! Refer
to user
documentation.
To Next Page
Loading...