EasyManua.ls Logo

Harman P43 - Reference Material; Safety Reminders

Harman P43
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Harman® • P-Series Owner’s Manual_R1 • 03/1424 3-90-436168c
B. Frequently Asked Questions
ISSUES SOLUTIONS
1. Metallicnoise. 1. Noiseiscausedbymetalexpandingandcontractingasit
heatsupandcoolsdown,similartothesoundproduced
byafurnaceorheatingduct.Thisnoisedoesnotaffect
theoperationorlongevityofyourappliance.
2. Whiteashbuilduponglass. 2. Thisisnormal.Cleantheglassusinganynon-abrasive
glasscleaner.
3. Glasshasbuildupofblacksoot 3. Excessive build-up of ash. See solution #4. The lower
burn settings will produce more ash, the higher burn
settingsproduceless.Themoreitburnsonlowthemore
frequentcleaningoftheglassisrequired.
4. Glasshasturneddirty. 4. Excessivebuild upof ash.The lowerburn settingswill
producemoreash,thehigherburnsettingsproduceless.
Themoreitburnsonlowthemorefrequentcleaningof
theglassisrequired.
5. Firehastallameswithblacktailsandislazy. 5. Thefeedrateneedstobereducedortheburnpotneeds
cleaning. Heat exchanger or exhaust blower needs
cleaning.
6. Smokystart-uporpuffsofsmokefromtheairwash. 6. Either the burnpot is dirty or there is too much fuel at
start-upandnotenoughair.
7. Largeameatstart-up. 7. This is normal. Flame will settle down once the re is
established.
Contact your dealer for additional information regarding operation and troubleshooting. Visit www.harmanstoves.
com to nd dealer.

Other manuals for Harman P43

Related product manuals