Vi3000 USER MANUAL
14.2 14.2: SNAPSHOTS, CUES > CUELIST
14.2: SNAPSHOTS, CUES > CUELIST
New Cue
Store a snapshot of the
current console state
into a new cue.
The new cue will be stored and numbered between the
currently selected cue and the next. For example, if you
have selected cue 2 of 3 and then press the [STORE]
button, the new cue will be numbered 1.5. If you have
cue 3 of 3 selected, the new cue will be numbered 4.
Duplicate Cue
Duplicate the currently
selected cue or cues.
If multiple cues are selected, the duplicates will be stored
sequentially, after the nal cue in the selection. Duplicate
cues are renamed with a 'D_' prex.
Move Cue
Move the selected cue
or cues to a new posi-
tion in the cue list.
The (MOVE) button becomes the (DROP) button when
selected.
Select Cue
Add the currently high-
lighted cue to a selec-
tion of multiple cues.
To create a multi-selection of non-contiguous cues, high-
light cues with the (UP) and (DOWN) buttons and click
(SELECT) to add them to the selection.
Multiselect
Cues
Create a contiguous
selection of multiple
cues.
To select multiple, contiguous cues, highlight the rst or
last in the selection, click (MULTI SELECT), then select
the range with the (UP) and (DOWN) buttons.
Select All Cues
Select all cues in the
current cue list.
To Next Page
Loading...
