Vi3000 USER MANUAL
15.1 15.1 TALKBACK & OSC > CONTROLS
15.1 TALKBACK & OSC > CONTROLS
Talkback to
External Active
Route the TB signal to
the TB OUT external
balanced analogue line
output on the rear of
the console (default), or
to any other available
output.
Change the EXT TB assignment via the Talkback/Oscil-
lator SETUP screen.
Routing
Active
Talkback Pre-
sets 1-3 Active
Press-to-talk (momen-
tary and latching),
user-programmable
Talkback switches.
Select the output routing for the Talkback presets via the
Talkback/Oscillator SETUP screen.
Routing
Active
To Next Page
Loading...
Need help?
General
