4.3: INPUT CHANNEL > DYNAMICS
Vi3000 USER MANUAL
4.3 INPUT CHANNEL > De Esser
Vi3000 USER MANUAL
16.3 16.3: MENU > GPIO
16.3: MENU > GPIO
You can congure all available GPIO channels in the GPIO (General Purpose Input Output) tab of the main menu.
However, please note that ‘virtual’ GPIO pins can also be assigned to cues in the cue list via the Snapshot SETUP
page. Virtual GPIO Pins are assigned via the function/parameter setting in the main GPIO settings.
The GPIO card (not included with console as standard but available as an optional expansion card and tted as stand-
ard to Stageboxes) provides electrically isolated opto-coupler inputs with integrated current sink (5 to 24 VDC) and
electrically isolated outputs using SPST relay contacts. 5 VDC and Gnd supply pins are provided. Inputs and outputs
are on standard D-type connectors (female).
If a GPIO card is tted, or a Stagebox is attached, the main screen shows a list of available GPIO connection ‘pins’
on the selected hardware (console or stage box). The upper section shown in blue is the GPI (input) section, and the
lower section shown in red is the GPO (output) section. Each entry shows its various congurations across several
columns; these are set in the VST section of the master bay Vistonics.
Menu: GPIO
To Next Page
Loading...
