Vi3000 USER MANUAL
16.3 16.3: MENU > GPIO
16.3: MENU > GPIO
Console GPIO
Select
Selects the GPIO in the control surface (16
GPIO channels).
No function unless optional
GPIO option card is tted to ei-
ther of the two expansion slots.
Stagebox GPIO
Select
Selects the GPIO in the
Stage Box (8 GPIO).
(no function unless one or more Stageboxes attached)
GPIO Up / Down
List
Scroll though the GPI
and GPO lists
The currently-selected input and output channels are
outlined in yellow.
GPI On / off
Enable and disable GPI
functionality
Individual setting for each Pin.
Function Select
Select the function to be
assigned to the GPI pin.
Depending on the function selection, the {Parameter}
eld may or may not be available. For example, the
Channel Mute (CH MUTE) function requires a channel
assignment - set using the {parameter} eld; the NEXT
CUE function does not require any additional parameter
Available functions: Channel Mute (CH MUTE); (F KEY
LED); Talkback Input (TB INPUT); Dim Monitors (DIM
MON); VIRTUAL GPI; LAST CUE; NEXT CUE; CUE UP;
CUE DOWN; RECALL CUE; Undo Snapshot (UNDO
SNAP).
Parameter Set
Used to assign addition-
al values to functions
Certain GPIO functions require and additional parameter.
Examples are channel number, virtual GPIO pin number,
and so on.
To Next Page
Loading...
