Harman SoundCraft Vi3000 - Page 60

6.5.3 6.5.3: INPUT CHANNEL > DYNAMICS > DE ESS
®
Vi3000 USER MANUAL
6.5.3: INPUT CHANNEL > DYNAMICS
De-Esser Sensi-
tivity Field / Group: SENS Range Low Range High
Adjust the sensitivty of
the De-esser process.
0% 100%
De-Esser In Field / Group: DEES Inactive Active
Activates the De-esser
process
Out In
De-Esser Range Field / Group: RNG Range Low Range High
Adjusts the De-esser
attenuation.
The maximum amount by which the signal in the 'Ess'
band is attenuated when the DeEsser is activated.
-18dB 0dB
Ess Band Solo Field / Group: RNG Inactive Active
Solo the De-esser
dynamic lter.
Helps pinpoint the 'Ess band' most suited to the current
signal.
Off Solo
De-Ess Filter
Frequency Field / Group: FREQ Range Low Range High
Adjust the centre
frequency of the De-ess
dynamic lter.
20Hz 20kHz
External Key
Assign Field / Group: MODE Inactive Active
x
Activate the External
Key Assign screen in
the main Vistonics touch
sreen panel.
All external I/O options for the external key become
available for selection.
+ -
DE-ESS Function
The de-esser is a dynamically controlled lter normally used to reduce the sibilance (‘sss’ components) in
a singer’s voice. If the de-esser is active, the signal level will be reduced only in the band set by the lters,
when the signal in this band exceeds the required threshold.