Vi3000 USER MANUAL
7.2 7.2: OUTPUTS > BUS CONFIGURATION
7.2: OUTPUTS > BUS CONFIGURATION
Bus Type
Set the Bus Type for
this Bus.
Choose from AUX, GRP or MTX with the encoder. If Aux
is selected and if the format eld is set to stereo then the
{CHPAN} eld is enabled.
Pan Follows
Channel
Set 'Pan follows chan-
nel' for a stereo bus.
Set this so the panning into a stereo auxilliary follows the
channel panning rather than the Aux panning.
Bus Format
Choose a format (mono
or stereo) for the bus.
For Stereo Auxilliary busses, the CHPAN option will
become available.
To Next Page
Loading...
Need help?
General
