Date printed: 24.01.12
96
D21m System
Max. cable length (A949.0411, multi-mode fibre, wavelength
1300 nm*, ø 62.5 or 50 µm) 2 km
(A949.0413, single-mode fibre, wavelength
1300 nm*, ø 9 µm) 15 km
(A949.0414, CAT5e or better, flexible braid) 75 m
(A949.0414, CAT7, solid core) 120 m
Input sampling rates 44.1/48/88.2/96 kHz ±100 ppm
Current consumption (3.3 V/5 V) 0.9 A/0.25 A
Operating temperature 0-40 °C
* different wavelengths on request
A949.04112x, A949.04132x
ON
87654321 87654321
S1 S2
A949.04142x (S1 and S2: see above)
S5
ON
87654321
LEDs LOCK On if a valid MADI signal is present at the input.
Switches/Connectors See ‘MADI HD Cards’ in chapter 6.5; for exceptions see below.
Exceptions
S3 Since the cards described here do not feature the GPIO interface switcho-
ver, the ‘RED’ center position of this switch needs to be selected only for
96 kHz/64-channel operation.
S5 DIP switch for FS Sync forward selection (on A949.04142x only):
1 2 3 4 5 6 7 8
OFF OFF OFF OFF OFF OFF OFF OFF No forward (factory default)
ON ON ON ON OFF OFF OFF OFF Main to AUX
OFF OFF OFF OFF ON ON ON ON AUX to Main
NO OTHER SETTINGS ALLOWED!
CTRL RS422 No GPIO pinout selectable.
To Next Page
Loading...
