Harmar Mobility SL600 HD - Preparation; Determine Overall Rail Length

SL600HD Heavy Duty Stair Li: Installaon & Service Manual
31JAN2020 | P/N: 75403 REV C
8
HEAVY DUTY STAIR LIFT: SECTION 3
PREPARATION
DETERMINE OVERALL RAIL
LENGTH (ONLY IF TRACK DID NOT
COME PRE-CUT TO LENGTH)
1. 


2. 

See Figure 3-1.
Figure 3-1
3. 
"




4. 

See Figure 3-2.
Figure 3-2
5. "


7" 9" 11" 13"

3.9" 5" 6.1" 7.2"
Do not cut the rail inside the house (aluminum chips
are very hard to remove from carpets).
NOTICE
Do not cut the end of the rail that contains the
joint holes. Remove the charger strips and wire
harness before cung.
WARNING
!