What to do if Harmar Mobility Lifting System shows a red light?
If the Harmar Mobility Lifting System displays a red light, reset the lift by turning it 'Off' and then 'On' again. If the light remains red, contact your local dealer and describe the problem.
What to do if Harmar Mobility Lifting System has a flashing amber light and beeping?
If the Harmar Mobility Lifting System shows a flashing amber light and beeps intermittently, move the lift to the charge strip station located at either end of the rail.
What does an amber light mean on Harmar Mobility Lifting System?
An amber light on the Harmar Mobility Lifting System indicates that the lift is touching an obstruction. It may be operated only in the direction away from the obstruction.
What does 7 beeps mean on a Harmar Mobility Lifting System?
7 beeps on the Harmar Mobility Lifting System indicate conflicting STOP UP and STOP DOWN switches are both detected.
What does 8 beeps mean on a Harmar Mobility Lifting System?
8 beeps on the Harmar Mobility Lifting System indicate conflicting STOP UP and STOP DOWN switches are both NOT detected.
What does 6 beeps mean on a Harmar Mobility Lifting System?
6 beeps on the Harmar Mobility Lifting System indicate conflicting FOOTREST UP and OBSTRUCTION DOWN switches.
What does 5 beeps mean on a Harmar Mobility Lifting System?
5 beeps on the Harmar Mobility Lifting System indicate conflicting FOOTREST DOWN and OBSTRUCTION UP switches.
What does 4 beeps mean on a Harmar Mobility Lifting System?
4 beeps on the Harmar Mobility Lifting System indicate conflicting OBSTRUCTION UP and OBSTRUCTION DOWN switches.
What does 3 beeps mean on a Harmar Mobility Lifting System?
3 beeps on the Harmar Mobility Lifting System indicate conflicting FOOTREST UP and FOOTREST DOWN switches.
What does a green light mean on Harmar Mobility Lifting System?
A green light on the Harmar Mobility Lifting System indicates that it is in operating mode and may be moved in either direction.
Explains safety alert symbols (Warning, Caution, Notice, Note) and general safety statement.
Lists specific precautions like payload capacity, obstructions, and servicing.
Identifies the Pinnacle SL600 and its intended use for mobility assistance.
Instructions for understanding the manual and warranty registration.
Details technical specs and compliance with safety standards.
Highlights the main operational features and built-in safety mechanisms.
Describes the On/Off switch, armrest controls, LED lights, and remote units.
Steps to power on the lift, prepare the seat, and secure the seatbelt.
Guidance on entering the lift and important safety notes during operation.
Instructions for moving the lift, exiting at the top, and folding for convenience.
Explains remote control use and manual seat swivel for user convenience.
Details the optional power swivel function and returning the seat to its travel position.
Instructions for descending with power swivel and operating the manual footrest.
Explains optional power footrest controls and automatic folding rail activation.
Guidelines for keeping batteries charged and when to replace them.
Minimal technical upkeep, plus specific checks for optional power swivel/footrest.
How to clean the stairlift components safely to maintain appearance and function.
Importance of a log for tracking service and maintenance activities as per standards.
Interprets LED indicator lights (green, amber, red) for operational status and errors.
Identifies major operational faults based on the number of beeps emitted by the lift.
Lists common minor faults like seat position, edge detection, and battery voltage issues.
Step-by-step guide for manually moving the lift during power failure or malfunction.
Details the limited lifetime warranty, covered parts, and exclusions.
Form fields for registering the lift and providing necessary purchase details.
General| Weight Capacity | 350 lbs |
|---|---|
| Power Source | Standard AC household outlet |
| Battery Backup | Yes |
| Maximum incline | 45 degrees |
| Warranty | 3 years |
To Next Page
