To Next Page
C
Cheryl BrownAug 2, 2025
How to use brake release switch during normal operation of Harmar Mobility VPL400-X?
- TthomasdouglasAug 2, 2025
The brake release switch should be flipped "down" during normal operation of Harmar Mobility Lifting Systems.
How to use brake release switch during normal operation of Harmar Mobility VPL400-X?
The brake release switch should be flipped "down" during normal operation of Harmar Mobility Lifting Systems.
General| Weight Capacity | 750 lbs |
|---|---|
| Power Source | 115 VAC, 20 amp dedicated circuit |
| Platform Size | 36" x 48" or 36" x 54" |
| Warranty | 3 years |
| Maximum Load Capacity | 750 lbs |
| Lift Height | 14 ft |
| Maximum Travel Distance | 14 ft |
| Lift Range | 40 inches |
| Operation | Constant pressure controls |
Explains the meaning of safety alert symbols used in the manual.
Lists crucial precautions to follow while operating the lift for safety.
Identifies the lift model and provides an overview of its purpose.
Stresses the importance of reading and understanding the manual for proper use and warranty.
Information on dealer contact and where to find technical specifications.
Outlines safety standards and code requirements the lift complies with.
Identifies and illustrates the key external components of the vertical platform lift.
Identifies and illustrates the key internal mechanical and electrical components.
Explains the lift's power source, operation mechanism, and safety systems.
Instructions on how to call or send the platform to a desired landing.
Steps for safely entering the platform when it has a gate.
Steps for safely entering the platform using the auto-fold ramp.
Instructions on how to use the platform's control panel.
Steps for safely exiting the platform at the desired landing.
Detailed steps for manually lowering the lift in emergency situations.
Procedures to maximize lift longevity and appearance, including cleaning.
Recommendations for covering and disabling power for outdoor lifts during long periods of non-use.
Recommended maintenance tasks to be performed every 6 months by a qualified technician.
Log for recording all service and maintenance performed on the lift.
Details the terms and conditions of the limited warranty for the lift.
Instructions for filling out and returning the warranty registration form.
