VPL400-X: Owner’s Manual
05MAY23 | 610-00103 A
5
INTRODUCTION
HIGHLANDER 400-X: SECTION 2
SECTION 2
INTRODUCTION
DEVICE NAME:
HIGHLANDER 400-X
VERTICAL PLATFORM LIFT
Indications of Use:
The Harmar Highlander 400-X Vertical Platform
Lift is to aid in the safe and efficient transfer of
individuals with limited mobility or disabilities, along
with their mobility devices, between different levels
of a residential building.
READ AND UNDERSTAND
This manual provides instructions for proper use
and maintenance of your Vertical Platform Lift.
Please refer to this Owner’s Manual for operating
instructions. Any alterations to the equipment
without written authorization by the manufacturer
is prohibited and will void the warranty.
PURCHASING
INFORMATION
If you have questions concerning the operation
and maintenance of your Vertical Platform, please
contact your dealer.
Please ensure that you fill out the separate warranty
form and return it within ten (10) days of purchase
to register your lift.
TECHNICAL SPECIFICATIONS
Visit harmar.com for specifications on your lift
model.
CODE STATEMENT
Your lift has been designed to meet Safety standard
ASME A18.1-2020 for Platform Lifts and Stairway
Chairlifts” under section 5 and has been certified to
CSA B44.1/ASME A17.1-2019 “Elevator and Escalator
Electrical Equipment”.
Code requirements for Vertical Platform lifts may
vary depending on location. It is the installer’s
responsibility to contact their state, city or local
code enforcement office and determine all the
regulations the lift and installation are subject to.
This must be done before installing the Vertical
Platform Lift.
Harmar Vertical Platform Lifts are to be installed
in accordance with all applicable codes and in
accordance with Safety standard ASME A18.1-
2020/CSA B44.1/ASME A17.1-2019.
The VPL400-X Vertical Platform Lift is intended for
maximum operation of 6 cycles per hour.
To Next Page
Loading...
