Harmony Merydian - Preparing Child Restraint for Use; Adjusting Harness Shoulder Straps

18
1. Loosen harness system by pushing the up-front metal
harness adjuster at the front of the seat just above
the adjustment strap (under the fabric) ❶ and by
simultaneously pulling the chest straps towards you ❷.
2. To determine what harness height is appropriate for
your child, place your child in the child restraint with
their back at against the backrest.
PREPARING CHILD RESTRAINT FOR USE
! WARNING: When used rear-facing, the shoulder
harness must be EVEN OR SLIGHTLY BELOW the
child’s shoulders.
! WARNING: When used forward-facing, the shoulder
harness must be EVEN OR SLIGHTLY ABOVE the child’s
shoulders. If the upper most harness posion is below
the child’s shoulders, DO NOT use
this child restraint.
! ENSURE the harness height is correct
for your child’s size. VERIFY OFTEN.
! WARNING: DO NOT use this child
restraint if the midpoint of your
child’s head is above the top of the
child restraint.
WARNING!
!
INCORRECT USE OF THE HARNESS SYSTEM IS THE
MOST COMMON MISTAKE PEOPLE MAKE. IT IS
VERY IMPORTANT TO READ, UNDERSTAND AND
FOLLOW ALL INSTRUCTIONS AND WARNINGS.
DO NOT MISTAKE COMFORT FOR SAFETY. THE
HARNESS SYSTEM MUST BE SNUGLY ADJUSTED
AT ALL TIMES.
ADJUSTING HARNESS SHOULDER STRAPS