Harper 5400 - Page 3

Chipper/Shredder
R
R
1
Thank you for purchasing a Harper Chipper/Shredder.
As with all Harper products, the Chipper/Shredder has been developed through tough design and
testing procedures to produce a top quality machine. This manual gives assembly, operating, and
service information for the model 1800 & 5400. Please read and understand all instructional mate-
rial included with the Chipper/Shredder or its components before assembling and operating the
equipment.
A Chipper/Shredder can present hazards to an operator who follows unsafe procedures in either
the operation or maintenance of the unit. Therefore, SAFETY WARNINGS are presented at cer-
tain locations in the text.
THIS SYMBOL: SAFETY WARNING!
MEANING: Failure to understand and obey this warning may result in injury to you or others.
Whenever this symbol is used, please pay very close attention to the information presented, and
make sure you fully understand. If you do not, contact your dealer or Harper Industries, Inc. for
clarication.
SAFETY WARNING!
ALL SHIELDS AND GUARDS MUST BE IN PLACE FOR PROPER AND SAFE OPERATION
OF THIS EQUIPMENT. WHERE THEY ARE SHOWN REMOVED IN THIS MANUAL, IT IS FOR
PURPOSES OF ILLUSTRATION AND INSTRUCTION ONLY. DO NOT OPERATE THIS
EQUIPMENT UNLESS ALL SHIELDS AND GUARDS ARE IN PLACE.
Harper Industries, Inc. is continually striving to improve the design and performance of its
products. We reserve the right to make changes in specications and design without thereby
incurring any obligation relative to previously manufactured products.
© 2012 Harper Industries, Inc.
The Harper name is a registered trademark of Harper Industries, Inc. All other brand and product
names are trademarks or registered trademarks of their respective companies.