EasyManua.ls Logo

Harper 5400 - Gasoline

Harper 5400
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chipper/Shredder
R
R
Gasoline
SAFETY WARNING!
Gasoline is extremely ammable and can
be highly explosive.
Always keep a re extinguisher near the
Chipper/Shredder during operation.
Always use an approved container for
gasoline.
Avoid open ames or sparks while
doing maintenance or refueling.
Never remove the fuel tank cap or add
gasoline when the engine is running or
while it is hot.
Never ll the fuel tank indoors (fumes
can collect).
Wipe up spilled gasoline immediately.
Do not store gasoline in a room with
an appliance that has a pilot light, or
where electrical appliances with auto-
matic switches could cause sparks.
Always store gasoline outside in a
safety can (a can which has a ame
arrestor and pressure relief valve in
pour spout).
Gasoline fumes are heavy and will
sink to the lowest point, collecting and
becoming more and more hazardous.
1 part gasoline in 20 parts air will ex-
plode easily and violently.
Never store the equipment with gaso-
line in the tank inside a building where
fumes may reach an open ame or
spark. Allow the engine to cool before
storing in any enclosure.
Guards & Shields
Keep the equipment and attachments
in good operating condition.
Keep all safety devices in place.
Replace all worn, damaged, unusable,
missing or lost safety shields and
guards before operating the equip-
ment.
Safety Decals
If safety related or instructional decals
become illegible or are removed, re-
place them immediately.
If you replace parts that have decals
attached to them, make sure the
decals are replaced with current ver-
sions, and that decals are on the re-
placement parts before the machine is
operated again.
New decals may be obtained from
your local Harper Dealer.
6