Harris DA-DSR6802+ - Page 53

DA-DHR/DH/DSR/DS/HR/H6802+ Installation and Operation Manual 37
Index
Waste from Electrical and Electronic Equipment
xiii
Features 2–4
Front modules 5
Hardware versions, reading 26
I-K
Input specifications 32
Installation
back modules 18
installing modules 18
jumpers 14
power ratings 10
preparing modules 11
removing modules 18
required frames 18
unpacking modules 11
Introduction
applications 4
main features 2–4
module descriptions
back modules 5–6
front modules 5
product description 2
signal flow diagrams 7
Jumpers
controls
Backup_EN switch 21
channel configuration switch 21
control types 20
local control 23
remote control 21
understanding jumper controls 20–23
J1 14, 21, 23
J2 14, 21, 23
J3 15, 21
J4 16–17, 21–22
J5 16–17, 21–22
setting jumpers 14
L-Q
LEDs
descriptions 27–28
module specific 28
module status 27
Local control jumpers 23
Locally controlled parameter list 23
Manual information vii–ix
Modes. See Reclock modes
Modules
1×4 (dual) configurations. See DA-DHR/DH/
DSR/DS6802+
1×8 (single) configurations. See DA-HR/H6802+
applications 4
back modules 5–6, 18
descriptions 2
features 2–4
front modules 5
installing modules 18
jumpers 14–17, 20–21
LEDs
module specific 28
module status 27
preparing for installation 11
removing modules 18
Operating temperature 34
Operation
alarms 29
Backup_EN switch 21
channel configuration switch 21
jumper control types 20
LEDs 27–28
local jumper controls 23
operating notes 20
parameters
changing settings 26
lists 23–25
parameter types 22
recalling settings 26
setting parameters 23–25
reading
hardware versions 26
software versions 26
remote jumper controls 21
understanding jumper controls 20–23
Output specifications 33
Parameters
adjustable 22
changing settings 26