239
Programming ANW2 (3)
. . SETS –CFG –01 –ANW2 –FREQ CONFIG
MAX BANDWIDTH
TO SCROLL / ENT TO CONT
5.0 MHz
. . SETS –CFG –01 –ANW2 –FREQ CONFIG
FREQUENCY (MHz)
230.0000
ENTER 227.500 TO 1997.500
0
PGM – SYS PRESETS – CFG – 01 – ANW2
POWER
TRANSEC
FREQ CONFIG
PGM – SYS PRESETS – CFG – 01 – ANW2
FREQ CONFIG
TRANSEC
POWER
. . SETS – CFG – 01 – ANW2 – FREQ CONFIG
TX POWER
TO SCROLL / ENT TO CONT
HIGH (5.0 WATTS)
Frequency Configuration
Tx Power Configuration
Next is FREQ CONFIG. If the MAX BANDWIDTH is set to 5.0 MHz, then the
FREQUENCY range is 227.500 MHz to 1997.500 MHz in 5 kHz steps. If the
MAX BANDWIDTH is set to 1.2 MHz, then the FREQUENCY range is 225.600
MHz to 1999.400 MHz in 5 kHz steps.
There are three TX POWER settings, HIGH (5 watts), MEDIUM (2 watts), LOW
(0.5 watts)
To Next Page
Loading...
