3-29
RF-7800W
SYSTEM ADMINISTRATION AND CONFIGURATION
3.9.2.4 Subscriber MAC
The unique MAC address of the SS radio is required when defining a new Normal Link.
3.9.2.5 STID
The STID is used as a name to differentiate between Link Templates.
3.9.2.6 STID Password
The STID Password provides authentication to associate with a particular STID. The STID Password Hash provides
a way of determining whether the STID Password is configured the same on two radios without disclosing the actual
passwords.
3.9.2.7 Link Partner IP Address
Once the SS radio has successfully linked up with the SC, each radio's IP address is made available in the link details
of the opposite radio as a convenient way to quickly log into the radio's management GUI.
3.9.3 Modulation and Coding Rates
Modulation and Coding rate settings are described below.
3.9.3.1 Adaptive Modulation
In order to handle dynamic link conditions, Adaptive Modulation should be employed. The radio monitors the bit-
error rate of data that is received over the link and dynamically controls both the downlink and uplink burst rates in
order to minimize bit errors and prevent links from dropping altogether.
To Next Page
Loading...
