Appendices
FCC Certification
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Industry Canada Compliance
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Electromagnetic Compatibility
BS EN 55032:2015, Class A. BS EN 55035:2017.
WARNING: The audio input/output ports are screened cable ports and any connections to them should be made using
braid screened cable and metal connector shells to provide a low impedance connection between the cable screen and
the device.
Electrical Safety
IEC 62368-1:2018
BS EN IEC 62368-1:2020+A11:2020
CSA CAN/CSA-C22.2 No. 62368-1 3rd Ed.
UL 62368-1 3rd Ed.
17 32Classic MS
To Next Page
Loading...